Documentation

Revision as of 09:40, 8 November 2012

Here are a few links you can start from. In addition, you might want to take a look at the list of all categories or all pages.

x164 Introduction

x164 consists of a central database which holds private and public rate tables, statistics and route configurations. Many x164 switches connect to the central x164 database to retrieve routing information and to update the statistics in realtime. Softswitches are preferably, but not limited to, yate-based switches. Call detail records are collected with radius. Call details, statistics and the configuration screens are accessible by the web access.

x164 Call flow

When receiving a call, the softswitch queries the database for user authentication. This can be made either by IP for fixed IP customers, or user/password for dynamic IP customers. After a positive authentication, a new query is issued to verify there is an incoming rate linked to the user for the dialed number. If there is no rate for the dialed number, the call is blocked. Otherwise the softswitch looks up the database for outgoing or DID routes. In case they don't exist, or if those available are not profitable, the call is blocked. When many valid routes exist, the system picks the most profitable, taking in account its rate and statistics. When the call finishes, the softswitch updates the CDR database and the route's statistics.

Rates database

The rates database uses the Profiles table to link customers, carriers an DID clients to their corresponding set of allowed routes in the Rates table. There are three types of profiles: incoming, carrier and DID. Incoming profiles link customers in the Customers table with a set of incoming routes. It is possible to create many records of the same incoming profile, allowing the user to dynamically choose between different rate sets by dialing a prefix (for more information look in the Profiles table documentation and in the HowTo page). Carrier profiles link Carriers with outgoing routes. DID profiles are used to define ranges of own numbers in the Rates table that are routed inside your network (you can find a guide about how to set DID clients here).

The Rates table defines the rate for each route and stores information about route's statistics. Statistics are used to measure route's profitability in terms of incoming versus outgoing rate and average call duration.

Web Access

x164 provides its members a web access to configure their settings, upload their rate tables and view call statistics. The interface and rating-engine is derived from CDRTool, which we modified heavily for speed and simplification.

Call search menu

Description

The call search offers access to call-detail-records (CDRs). CDRs can be summarized and filtered for various statistics.

Selection fields

Rating menu

Access to all data influencing the rating and routing. The rating data is contained in several tables which can be selected on the top-right side. The cost calculation of the calls stored in the system occurs in parallel and periodically using the values that the user introduce ​​in this tables.

Customers table

Description

The Customers table shows details of your authorized customers who may send calls through the x164 system. The user can be authorized by trusted peer or subscriber and password.

Data fields

Carriers table

Description

The Carriers table has the details of your carriers to send calls to them.

Data fields

Profiles table

Description

The profiles table shows the rate details assigned to customers which will be used to calculate the price of the call by x164 system,

Data fields

Rates table

Description

The rate table shows details to calculate the price by x164 system according to valid tariff and destination

Data fields

Gateways table

Description

The gateways table serves to identify the IP address of the switches used by the reseller.

Data fields

DIDclients table

Description

The DIDclients table shows the DID clients with their numbers.

Data fields

Currencies table

Description

The currencies table shows the currencies used by x164 system. They are used in the routing process to look for the most appropriate route.

Data fields

Quota table

Description

The quota table stores the billed sum of calls made by each subscriber. The table allows to set a monthly quota limit. When the limit is reached the subscriber is blocked. The usage is reset at the beginning of each month. Un-blocking of subscribers has to be done manually.

Data fields

Generation of client rate tables

x164 allows to generate rate tables for customers from outgoing carrier rate tables. x164 consolidates the carrier rates into one rate table following a strict longest-code-match logic. The rate table can be further simplified by filtering for quality or consolidating prices within tolerances to one code/price.

The operation takes the following parameters as inputs:

The rateDate input filters rates by date. The relationship with the rates table is as follows:

After this initial date filtering the system searches the best price for each destination code. Longest-dialing code matching is observed for each available rate table. The parameters qACD and qASR are used as to filter low quality routes. For a given destination, if there are routes that satisfy this criteria, the cheapest one will be picked. In case there are no routes with above minimum quality, the one with the best quality will be selected. At the end of this process there will be one record for each destination dialing code. Then all records with price lesser than rateMin are set to rateMin.

In the next steps, rates will be simplified using the tolerance parameter. First redundant codes will be removed if shorter codes exist within their price tolerance. As an example, consider the following record:

Destination	Price
371660		25

With a tolerance of 15%, this code would be deleted from the final selling table if a shorter match with price within the range [22.5 - 28.5] is found, such as:

Destination	Price
3716		26

In the second stage of the simplification process, the system looks for sets of ten consecutive codes. If they are within the same tolerance range, a new rate is created using the information of the most expensive record in the set and the shorter destination that matches all the consecutive destination. For example, for the following set:

Destination	Price
3710		50
3711		50
3712		45
3713		51
3714		47
3715		48
3716		49
3717		50
3718		47
3719		46

First the system makes sure the shorter code 371 does not already exist in the database. If it doesn't, it checks that all the prices are within the tolerance range. In the previous table case, for a tolerance of 15%, the cheapest price upper limit would be 45*(1+15/100) = 51.75, which is superior to the highest price in the set. Thus, this set is removed from the final table and a new record is created:

Destination	Price
371		51

Once the simplification process is finished, the rates with destination longer than the max_code_length parameter are deleted. Finally, all the prices are increased according to the profit percentage specified in the input.

CSV import and export

The x164 system supports CSV import and export to ease the task of updating the rating tables. CSV files are plain text files which store spreadsheet or database information, using commas to separate fields and line breaks to separate records. Rating related information will frequently be available in some spreadsheet format, so in order to upload it to the x164 database you will need to export to CSV first.

"Destination", "Price"		// Example of CSV file with two fields ('Destination' and 'Price')
34928, 120			// and two records.
349287, 100

Export a spreadsheet file to CSV

We will be using OpenOffice Calc for this example, although the process is similar in other spreadsheet softwares like Excel. First step is to reorder your data to fit the x164 format. Take as an example the following rates table with two records:

Country			Country Dial		$ USD		Effective Date
Spain			34			0.258		Oct 09, 2012
Spain			34928			0.1757		Oct 09, 2012

Create a new spreadsheet where the first row contains the field names for the relevant table of x164, in this case Rates. The only exception is the first field 'Id', that instead must be named 'ops'. All the records must be set to '1' for this column. Then insert your data in the appropiate fields of the new spreadsheet:

ops	Reseller   Rate		Destination   Region	Description	App	Conn	Price	Conn In	Price In  Start Date  End Date
1	100	   Rate_Name	34			Spain		Audio		2580			  09-10-2012
1	100	   Rate_Name	34928			Spain		Audio		1757			  09-10-2012

Note that CSV files use line breaks to separate records and commas to delimit fields. You must ensure those are not present in your data. To export the spreadsheet to a CSV file in OpenOffice, simply go to File -> Save As and select "Text CSV (.csv)". In the opened dialog you must rename the file with the name of the destination table, an underscore '_' and a number.

rates_1.csv		// CSV file names example for the Rates, Carriers and Profiles tables.
carriers_25.csv
profiles_81.csv

Import a CSV file to the database

In the x164 web access, go to the destination table and click on 'Choose a file'. Select your file and click 'Import'. When the file is correctly uploaded a confirming message will be prompted. The imported data will be available after a few minutes.

Export table as CSV file

You can also export data from the database in CSV format by clicking on the 'Export table.csv' button on the right side of a table. A new browser window will be opened showing the CSV text.

Softswitch

The x164 switch is based on yate, In its basic configuration the switch can handle SIP and H323 calls. IAX, ISDN, SS7 calls are theoretically possible. Users can activate further yate modules to extend the possibilities. x164 members are encouraged to post their suggestions and ideas on the [ http://forum.x164.com/ forum]. The yate configuration is located in /usr/local/etc/yate.

Server settings

Time zone

The server running yate should have its timezone set to GMT time if the timezone setting is used in the rating customers table. The timezone setting in the rating customer table must reflect the local time of the tariff in the rating profile table. The timezone setting is used to correct the CDR timestamps coming from the softswitch. The Starthourweek and Endhourweek time ranges in the rating profiles table are always in local time.

CDR module - cdrbuild.conf

Description

This module builds the CDR messages (Call Details Record) which are used later in the radius module. Here are set the necessary attributes to create the correct CDR messages.

h323 Channel module - h323chan.conf

Description

This module gives support to h323 protocol by using the open h323 library.

Mysql database module - mysqldb.conf

Description

This module is used to make the connection between yate and a MySQL database. Establishing the necessary parameters as host, port, database and password.

Radius module - yradius.conf

Description

This module give support to establish communication between Yate and FreeRADIUS, as well the ip address and port of the FreeRADIUS server. Are set the specific attributes to sent in the CDR message and are assigned the correct values.

Regexroute module - regexroute.conf

description

This module is used in addition to the register module, to assign values ​​of different parameters in the call as the error messages or the formats to use in transcoding calls, used to route calls without using database.

Register module - register.conf

The register module defines the messsage handlers which are communicating with the x164 database. Message handlers "catch" internal yate messages, issue queries to the database and return the result back to yate. x164 is configured to use mysql stored-procedures as message handlers.

Authuser

Description

User_Auth is used to identify the subscriber.

Statement

PROCEDURE `proc_user_auth`( 
IN username VARCHAR(100),   // username received in SIP INVITE
IN domain VARCHAR(100),     // domain name from caller
IN address VARCHAR(25)      // IP address and port of the received call
IN password VARCHAR(25)     // secret key for MySQL procedures in Yate
)

Register

Description

This query handle register messages, add in database data of register users and the last time that the user was registered.

Statement

PROCEDURE `proc_user_register`( 
IN ip_host VARCHAR(30),		// IP address received in SIP INVITE
IN ip_port INT,			// IP port received in SIP INVITE
IN expires INT,			// register expiration time
IN authname VARCHAR(125)	// authorized subscriber name corresponding in data base
IN password VARCHAR(25)		// secret key for MySQL procedures in Yate
)

Unregister

Description

This query handle unregister messages initializing the data entered by register message.

Statement

PROCEDURE `proc_user_unregister`(
IN authname VARCHAR(125)        // authorized subscriber name corresponding in data base
IN password VARCHAR(25)        // secret key for MySQL procedures in Yate
)

Engine timer

Description

The engine timer found that users have exceeded the time of registration and invalidate the dynamic_ip.

Statement

PROCEDURE `proc_user_enginer_timer`(
IN password VARCHAR(25)       // secret key for MySQL procedures in Yate
)

Preroute

Description

Preroute checks whether an incoming route for the combination of IP address and called number or authname and called number exists. The caller is either identified by IP address or was identified by authname/password combination in authname procedure. If no incoming route exists the call is blocked.

Statement

PROCEDURE `proc_get_preroute`( 
IN authname VARCHAR(125),     // authorized subscriber name corresponding in data base
IN address VARCHAR(25),       // IP address and port received in SIP INVITE
IN called VARCHAR(100)        // the called number, optionally with prefix
IN password VARCHAR(25)       // secret key for MySQL procedures in Yate
)

Route

Description

This selects the possible outgoing routes according to the incoming parameters, looking for the best quality and profit. Unprofitable routes are blocked.

Statement

PROCEDURE `proc_get_route`( 
IN usernameNobuy VARCHAR(125), // Subscriber_out found in incoming route to prevent call loops
IN rtproxy_in TINYINT(4),      // 0/1 flag to specify whether the rtp stream of the incoming call leg is proxied.
IN realRateSell FLOAT,         // (client) call rate found in preroute expressed in the base currency (EUR) 
IN called VARCHAR(100),        // Called number (optionally with prefix). The prefix is not used.
IN _format_in VARCHAR(255),    // Codecs received in incoming call leg
IN password VARCHAR(25)        // secret key for MySQL procedures in Yate
)

Route V2

Description

Selects the possible outgoing routes according to the incoming parameters. It also allows to select the routing method, set quality limits, and enable loss making calls.

Statement

PROCEDURE `proc_get_route_v2`( 
IN usernameNobuy VARCHAR(125),		// Subscriber_out found in incoming route to prevent call loops
IN rtproxy_in TINYINT(4),		// 0/1 flag to specify whether the rtp stream of the incoming call leg is proxied.
IN realRateSell FLOAT,			// (client) call rate found in preroute expressed in the base currency (EUR) 
IN called VARCHAR(100),			// Called number (optionally with prefix). The prefix is not used.
IN _format_in VARCHAR(255),		// Codecs received in incoming call leg
IN password VARCHAR(25),		// secret key for MySQL procedures in Yate
IN routing VARCHAR(100),		// Routing method: 'least_cost', 'quality'. Default is profit routing.
IN qACD INT,				// Minimum Average Call Duration. Routes below this limit are blocked.
IN qASR INT,				// Minimum Success Rate (successful calls/total calls). Routes below this limit are blocked. 
IN blocklosscalls TINYINT(4))		// 0/1 flag, blocks unprofitable calls when 0
)

cdr_finalize

Description

This procedure computes the values ​​of the call once finished to update the statistics in the system.

Statement

PROCEDURE `proc_cdr_finalize`( 
IN duration FLOAT,         // the overall call duration
IN billtime FLOAT,         // the time the call was connected
IN ringtime FLOAT,         // duration of call ringing
IN direction VARCHAR(10),  // incoming or outgoing
IN status VARCHAR(10),     // if the call was connected or not
IN rateidBuy BIGINT(20),   // id of the rate for the outgoing call leg
IN rateidSell BIGINT(20),  // id of the rate for the incoming call leg
IN password VARCHAR(25)    // secret key for MySQL procedures in Yate
)

RTP Channel module - yrtpchan.conf

Description

This module provides RTP and udptl transports for any technology that requieres it as SIP or H.323. The RTCP support is disabled.

SIP Channel module - ysipchan.conf

Description

This module give support to SIP protocol using the YASS library. Here also is posible select the value "expires" used in register.conf and the codecs enable to use.

Yate - yate.conf

Description

In this configuration file is selected the modules that are in use, and the parameter "timeout" limits the call duration as 2h.