Quickstart

From x164 documentation wiki
Revision as of 07:53, 31 August 2012 by Brey87 (Talk | contribs)

Jump to: navigation, search

This document details the steps needed to get your x164 switch started.

Contents

Installing a Linux distribution

Use of Debian Squeeze is recommended for its stability, but you can use other Linux distributions as you wish. You can look for the proper option for your machine here. Installation guides are also available for the different supported architectures here.

Disk partitioning

The recommended partition scheme is the following:

Partition Size File system Comments
/boot 500 MB ext2
swap ~ swap Size should be the same as RAM
/ 20 GB ext4
/vz ~ ext4 OpenVZ will be installed in this partition. It should take up the remainder of the available memory

It is encouraged that you follow the order shown in the table when partitioning.

Updating and upgrading

After completing the installation you should run the following commands:

sudo apt-get update
sudo apt-get upgrade

This ensures you have the latest version of the installed packages.

SSH

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox